Hardy HI 4050 Single-Scale Weight Controller User Manual download pdf

QUICK INSTALLATION GUIDE

MECHANICAL INSTALLATION

Installing the HI 4050 Weight Controller in a Panel

FIG. 1 PANEL HOLE DIMENSIONS

FIG. 2 PANEL HOLE DIMENSIONS (RETROFIT)

Step 1. Make sure that all Electrostatic Discharge (ESD) precautions

are taken before and during installation.

Step 2. Use the provided template to make the hole pattern in the

panel door or cover. (Part # 0578-0071-01)

FIG. 3 PANEL MOUNT INSTALLATION

Step 3. Use a phillips head screwdriver and install the five (5) 6-32 x

1/2 inch screws that fasten the bezel to the panel. (See Fig. 3)

Use a torque screw driver and torque each screw to 10 inch/

pounds. DO NOT OVERTIGHTEN!

Step 4. Thread the four (4) threaded rods through the appropriate

holes in the panel and into the bezel. For the retrofit you don’t

have to place the rods through the holes. (See Fig. 4)

Step 5. Hand tighten each rod until you can no longer turn the rod. Do

not force the rods or use pliers of any kind.

Step 6. Put the Display cable and connector through the 1.25-inch

hole in the panel door or cover and plug the display connector

into the display header in the bezel. (See Fig. 3)

Step 7. Gently slide the electronic enclosure onto the threaded rods

while making sure the display cable glides easily into the

enclosure and does not kink. Move the electronic enclosure

toward the panel until it stops. (See Fig. 3)

Step 8. Thread the four (4) 6-32 thumb screws onto the threaded rods

until tight. Do not use pliers on the thumb screws.

FIG. 4 RETROFIT PANEL MOUNT INSTALL FOR HI 2151/30 &

HI 2110

DIN Rail Installation HI 4050 Weight Controller

Step 1. Snap the DIN rail mounting feet into any of the two holes on

the front panel of the electronic enclosure. (See Figs. 5 & 6)

FIG. 5 DIN RAIL MOUNTING FOOT

1 2 3

QUICK INSTALLATION GUIDE 1

Summary of Contents

Page 1 - QUICK INSTALLATION GUIDE

QUICK INSTALLATION GUIDEMECHANICAL INSTALLATION Installing the HI 4050 Weight Controller in a PanelFIG. 1 PANEL HOLE DIMENSIONSFIG. 2 PANEL HOLE DIM

Page 2

FIG. 6 VERTICAL AND HORIZONTAL ORIENTATIONStep 2. When installing firmly push the mounting feet until you hear a snapping sound. The snap means they

Page 3

INPUT POWER WIRINGWARNING: DO NOT PLUG THE POWER CONNECTOR INTO THE HEADER WITH LIVE POWER. TO DO SO WILL RESULT IN PROPERTY DAMAGE AND/OR PERSONAL I

Comments to this Manuals

No comments

Hardy HI 4050 Single-Scale Weight Controller User Manual

Browse online or download User Manual for Tools Hardy HI 4050 Single-Scale Weight Controller. Hardy HI 4050 Single-Scale Weight Controller User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Tools Hardy HI 4050 Single-Scale Weight Controller