Hardy HI 4060 Rate Controller User Manual download pdf

QUICK INSTALLATION GUIDE

MECHANICAL INSTALLATION

Installing the HI 4060 Rate Controller in a Panel

FIG. 1 PANEL HOLE DIMENSIONS

Step 1. Make sure that all Electrostatic Discharge (ESD) precautions

are taken before and during installation.

Step 2. Use the attached template to make the hole pattern in the panel

door or cover. (See Attached)

FIG. 2 PANEL MOUNT INSTALLATION

Step 3. Use a phillips head screwdriver and install the five (5) 6-32 x

1/2 inch screws that fasten the bezel to the panel. (See Fig. 3)

Use a torque screw driver and torque each screw to 10 inch/

pounds. DO NOT OVERTIGHTEN!

Step 4. Thread the four (4) threaded rods through the appropriate

holes in the panel and into the bezel. For the retrofit you don’t

have to place the rods through the holes. (See Fig. 4)

Step 5. Hand tighten each rod until you can no longer turn the rod. Do

not force the rods or use pliers of any kind.

Step 6. Put the Display cable and connector through the 1 inch hole in

the panel door or cover and plug the display connector into the

display header in the bezel. (See Fig. 3)

Step 7. Gently slide the electronic enclosure onto the threaded rods

while making sure the display cable glides easily into the

enclosure and does not kink. Move the electronic enclosure

toward the panel until it stops. (See Fig. 3)

Step 8. Thread the four (4) 6-32 thumb screws onto the threaded rods

until tight. Do not use pliers on the thumb screws.

DIN Rail Installation HI 4060 Rate Controller

Step 1. Snap the DIN rail mounting feet into any of the two holes on

the front panel of the electronic enclosure. (See Figs. 5 & 6)

FIG. 3 DIN RAIL MOUNTING FOOT

FIG. 4 VERTICAL AND HORIZONTAL ORIENTATION

Step 2. When installing firmly push the mounting feet until you hear a

snapping sound. The snap means they are mounted correctly.

Step 3. After installation give each mounting foot a little tug to make

sure they are seated correctly.

NOTE: There are several horizontal and vertical mounting

options. It is highly recommended that at least two

mounting feet be used per enclosure.

Step 4. To mount the enclosure onto a DIN rail. Place the mounting

feet on the DIN Rail and firmly press down until the mounting

feet snap onto the rail.

3.100

.172 THRU, 9 PL

4.05

3.200

3.000

2.590

1.274

.41

.205

.44

1.25 THRU

.475

.755

5.250

6.200

7.08

INSTRUMENT

BEZEL OUTLINE

1 2 3 4 5 6 ... 26 27

Summary of Contents

Page 1 - QUICK INSTALLATION GUIDE

QUICK INSTALLATION GUIDEMECHANICAL INSTALLATION Installing the HI 4060 Rate Controller in a PanelFIG. 1 PANEL HOLE DIMENSIONSStep 1. Make sure that a

Page 2

QUICK INSTALLATION GUIDEMECHANICAL INSTALLATION Installing the HI 4060 Rate Controller in a PanelFIG. 1 PANEL HOLE DIMENSIONSStep 1. Make sure that a

Page 3

Step 5. To remove the mounting feet use a finger on the clip and gen-tly pull up on the tab.NOTE: For Remote Display installation please see Chapter 3

Page 4

DC Power Input (-DC)WARNING: DO NOT OPERATE WITH INCORRECT LINE VOLT-AGE. TO DO SO WILL RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY. MAKE SURE T

Page 5

QUICK INSTALLATION GUIDEMECHANICAL INSTALLATION Installing the HI 4060 Rate Controller in a PanelFIG. 1 PANEL HOLE DIMENSIONSStep 1. Make sure that a

Page 6

Step 5. To remove the mounting feet use a finger on the clip and gen-tly pull up on the tab.NOTE: For Remote Display installation please see Chapter 3

Page 7

DC Power Input (-DC)WARNING: DO NOT OPERATE WITH INCORRECT LINE VOLT-AGE. TO DO SO WILL RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY. MAKE SURE T

Page 8

QUICK INSTALLATION GUIDEMECHANICAL INSTALLATION Installing the HI 4060 Rate Controller in a PanelFIG. 1 PANEL HOLE DIMENSIONSStep 1. Make sure that a

Page 9

Step 5. To remove the mounting feet use a finger on the clip and gen-tly pull up on the tab.NOTE: For Remote Display installation please see Chapter 3

Page 10

DC Power Input (-DC)WARNING: DO NOT OPERATE WITH INCORRECT LINE VOLT-AGE. TO DO SO WILL RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY. MAKE SURE T

Page 11 - Digital Inputs

QUICK INSTALLATION GUIDEMECHANICAL INSTALLATION Installing the HI 4060 Rate Controller in a PanelFIG. 1 PANEL HOLE DIMENSIONSStep 1. Make sure that a

Page 12

Step 5. To remove the mounting feet use a finger on the clip and gen-tly pull up on the tab.NOTE: For Remote Display installation please see Chapter 3

Page 13

Step 5. To remove the mounting feet use a finger on the clip and gen-tly pull up on the tab.NOTE: For Remote Display installation please see Chapter 3

Page 14

DC Power Input (-DC)WARNING: DO NOT OPERATE WITH INCORRECT LINE VOLT-AGE. TO DO SO WILL RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY. MAKE SURE T

Page 15

QUICK INSTALLATION GUIDEMECHANICAL INSTALLATION Installing the HI 4060 Rate Controller in a PanelFIG. 1 PANEL HOLE DIMENSIONSStep 1. Make sure that a

Page 16

Step 5. To remove the mounting feet use a finger on the clip and gen-tly pull up on the tab.NOTE: For Remote Display installation please see Chapter 3

Page 17

DC Power Input (-DC)WARNING: DO NOT OPERATE WITH INCORRECT LINE VOLT-AGE. TO DO SO WILL RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY. MAKE SURE T

Page 18

QUICK INSTALLATION GUIDEMECHANICAL INSTALLATION Installing the HI 4060 Rate Controller in a PanelFIG. 1 PANEL HOLE DIMENSIONSStep 1. Make sure that a

Page 19

Step 5. To remove the mounting feet use a finger on the clip and gen-tly pull up on the tab.NOTE: For Remote Display installation please see Chapter 3

Page 20

DC Power Input (-DC)WARNING: DO NOT OPERATE WITH INCORRECT LINE VOLT-AGE. TO DO SO WILL RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY. MAKE SURE T

Page 21

DC Power Input (-DC)WARNING: DO NOT OPERATE WITH INCORRECT LINE VOLT-AGE. TO DO SO WILL RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY. MAKE SURE T

Page 22

QUICK INSTALLATION GUIDEMECHANICAL INSTALLATION Installing the HI 4060 Rate Controller in a PanelFIG. 1 PANEL HOLE DIMENSIONSStep 1. Make sure that a

Page 23

Step 5. To remove the mounting feet use a finger on the clip and gen-tly pull up on the tab.NOTE: For Remote Display installation please see Chapter 3

Page 24

DC Power Input (-DC)WARNING: DO NOT OPERATE WITH INCORRECT LINE VOLT-AGE. TO DO SO WILL RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY. MAKE SURE T

Page 25

QUICK INSTALLATION GUIDEMECHANICAL INSTALLATION Installing the HI 4060 Rate Controller in a PanelFIG. 1 PANEL HOLE DIMENSIONSStep 1. Make sure that a

Page 26

Step 5. To remove the mounting feet use a finger on the clip and gen-tly pull up on the tab.NOTE: For Remote Display installation please see Chapter 3

Page 27

DC Power Input (-DC)WARNING: DO NOT OPERATE WITH INCORRECT LINE VOLT-AGE. TO DO SO WILL RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY. MAKE SURE T

Comments to this Manuals

No comments

Hardy HI 4060 Rate Controller User Manual

Browse online or download User Manual for Tools Hardy HI 4060 Rate Controller. Hardy HI 4060 Rate Controller User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Tools Hardy HI 4060 Rate Controller